oil-based steel plate slitting machine tension belt, aluminum plate slitting machine tension belt

August 15, 2021

Oil-based steel plate slitting machine tension station belt, metallurgical seamless pure PU winder belt

Drive belt, timing belt, toothed belt, V-belt, etc.

Cold rolled metallurgical slitter belt

First, the structure of the slitter belt

The bottom layer is 1.2mm polyurethane strong tensile layer, the middle 2mm high elastic elastic base layer, the surface 2mm thick pure imported TPU wear-resistant elastic layer or leather layer total thickness is about 5.2mm. This structure is produced according to the structure of Japanese original belt.

Second, the technology of the slitter belt

The inner circumference of the belt has various specifications such as 1270 1410 1580 1680, and the non-standard size can be customized according to the customer's demand.

Third, the use of the strip machine belt:

Suitable for steel plate, aluminum plate aluminum foil, stainless steel plate, copper plate, automobile plate home appliance board and other metallurgical cold-rolled sheet slitting machine

4. Precautions for the normal use of cold rolled metallurgical strips:

1 Ensure that the bottom of the belt is always lubricated. Can not be short of oil, otherwise the life is greatly shortened

2, to ensure the normal operation of the refrigeration system of the equipment, pay attention to the daily maintenance of the belt is conducive to extending the life

3. The front side of the slitting machine on the steel plate and the aluminum plate should be cut to reduce the damage of the belt by the burr.

4, the replacement of the belt is best to replace the whole set, or the upper belt with a half set of overall replacement to ensure uniform tension pressure
aluminum slitter tension belt

The above is the oil-based steel plate slitting machine tension belt, aluminum plate slitting machine tension belt we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:The use and maintenance of ultra-thin knife slitting line

Next:Analysis of vertical shaking mechanism of aluminum plate cold rolling mill